Home >  About Us >  Company Profile
  • Phase Selection Closing Circuit Breaker in the Emergency Transformer Short Circuit Test Loop
  • Platform for Withstanding Short-Circuit Capacity Test for EHV Power Transformer
  • Limiting DC Component Resistor in High-Voltage Test Device
  • Bending Test Device for Narrow Side of Bus
  • Controllable Temperature Rising Device for XRD Test Equipment
  • Portable Chlorine Ion Monitoring Sensor
  • Pre-Breaking Current Detecting Device for High-Voltage Circuit Breaker
  • Filter Membrane for Fixing Asbestos Fibre
  • Artificial Physical Link Device for Near Zone Fault
  • Tensile Test Machine with Three Directions
  • Telescopic Pneumatic Isolating Switch
  • Double-Linkage Pneumatic Isolating Switch
  • New Immersion Test Device for Lightning Arrester
  • New Impact Test Device
  • New Internal Fuse Isolation Test Device for High-Voltage Capacitor
  • New Fixed Head Device for Loop Antenna
  • New Durability Verification System for Speed Sensitive Rigid Body Sliding Contact Arterial System
  • New Calibration Device for Torque Wrench Tester
  • New Current Load Box for Pressure Teter Calibration
  • A new type of high voltage and high power impact without inductance resistor
  • A new type of contactor contact structure capable of slowing bouncing
  • A new type of salt solution arrangement for salt spray test
  • A discharge device for high voltage igniting gap
  • A sphere gap switch for synthetic test circuit
  • A manipulator for operating performance test of low voltage apparatus for rotary type operation
  • A suspension antenna and its catenary feeder system for Vehicel radiated immunity test
  • New Test device for Temperature Rise of Bus Duct
  • New Sphere Gap Switch
  • A new type of flat transport vehicle
  • Movable climbing ladder capable of crossing obstacle
  • Movable lifting bracket for thermal cycling test of electric power fittings
  • Test fixture for drawing force of threaded sleeve
  • A new type of switching knife switch device for synthetic circuit reactor
  • Test platform for loss measurement of dry type air core reactor
  • Oil Tank Filter for Breakdown Voltage Test
  • A New Pressure-type Water Level Gauge Based on Ceramic Capacitance Sensor
  • A Forklift Anti-drop Device
  • A kind of separating action distance measuring equipment
  • An Inclining Test Device for Power Distribution Unit and Control Unit in Ships
  • A Unit-bus type Six-Loop Vacuum Electromagnetic Starter for Mining
  • A 500KA Dynamic Thermal Stability Test Loop Device Using Coaxial Cable
  • A new type of auxiliary junction box that is applied for calibrating the tester of DC Resistance of Transformer
  • A New Light Ignition Test Device
  • A Pendulum Type Mechanical Impact Test Device
  • A new type of resistive and bent test equipment for the cold state of heater
  • Overvoltage Composite Protector Capable of Restraining Voltage Build-up Rate for High-Voltage Tests
  • A Movable Simple AC/DC Charging Pile Recharge Socket Interface Test Tooling
  • Busbar Wide-bend Bending Test Device
  • A Simple Vehicle Rolling Device
Suzhou Electrical Apparatus Science Research Institute Co.,Ltd.
Address: No.5 Qianzhu Road, Yuexi, Wuzhong District, Suzhou 215104, CHINA
Branch Address: No. 7 Yonghe Street, Binhe Road, New District, Suzhou 215011, CHINA
Phone: +86-512-69551355
Email: eservice@eeti.cn